WA Peen Yy BLL NEO U22-XJ Max 4K Ultra HD Android” Media Hub English User Guide www, minicomputer
Processor on Mamore Lineman Storage Wireless Connectivity Operating System Video Output Dial Audio Output Analog Audio Output Peripheral interface Quad Core Cortex A73 + Dual Care Cortex AS3 Processor [6451] Mall G52 MP6 4GB DORA 64GB emcee 5.1 802.11ax 2X2 MIME Dual-Band WH, Bluetooth 5.0 Ancheid™ 9.0 Fie OF HDMM™ 2.1 {4K @ 60H) HDMM™ 2.1, Optical SOLIDIFY 3.5mm audio jack RI-45 Gigabit Theme, Micro SD card reader, USB 2.
MINX NEO U22-XJ Max Is designed to be the center of your home entertainment needs. Transforming the entertainment experience with hardware that captures the cinematic experience, delivering a dynamic audio and visual experience that puts you right at the heart of the action. Immerse yourself in next-level entertainment all from your living room with NEO U22-XJ Max. Featuring a grue high-performance processor and powered by Androld™ 9.0 Pl, NEQ U22-XJ Max Is bully for speed.
IR Receiver Compatible with Technologist Harmony, Power LED The LED glows bite when NEO U22-XJ Max ks on, green when suspended. Power Button To power on the NEO U22 XJ Max. press and hold the power button for 2.3 seconds until the power LED glows. To parer off the NEO U22XJ Max, press and hold the parer button unfit the display shows the power off options, select OK fo confirm your choice. Alliteratively, hold the power button for 8 seconds to force power off.
USB 3.0 Pork Connect an textual USB device fo the NEO U22-X) Max such as webcam, wired mouse or textual hard dive. HDMI Port Connect the NEO U22-XJ Max via HDMI monitor using included HDMI cable. USB-C Port Only supports data transfer, Gigabit Ethernet Port Connect an Theme cable for wired Infest access up to 1000Mbps. Optical Audio Port Connect to the optical audio input or an textual sound processing unit, such as an amplifier. DC 12v Po war-In Jack Connect the Included 12v power adapter.
‘You may control NEO U22-XJ Max via one of the following input methods: 1. Wired mouse 2.2.4GHz USB wireless mouse and keyboard set 3, 2.
NEO U22-XJ Max connects to your TV or PC monitor via HDMI, Step 1: Connect the HOMO Cable Connect one end of the cable to the corresponding port on your TV/PC monitor. and the other end fo the HDM port on NEO U22 XJ Max. Sta 2: Connect the Power Connect the supplied 12v power adapter to the power jack. Press and hold the power button for 2-8 seconds to power on, the blue parer LED should then glow.
Language Setup You may choose the desired system language by following these steps: Launcher Home Screen > Fingerings > Language The default language s English.
Copyright 2019 MINI Technology Limited. Al rights reserved. No part of this guide, Including the products and software described In It, may be reproduced, transmitted, transcribed, stored in a retrieval system, of transited into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of MINI Technology Limited. MINI and the MINI loge are trademarks of MINI Technology Limited.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant fo pert 15 of the FCC Rules. These Emits are designed to provide reasonable protection against harmful Interference In a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
NEO U22-XJ Max an den Fernseher oder Computer Monitor anschieben. Schiit 1: Schi Leben Sle das HUMID Kabel an Bn Ende des Kabels an den Eingang des Fernseher oder Monitor und das andere Ende in den Anschluss an der NEO U22-XJ Max. Schiit 2: Som anschieben Schieben Sie das mitgelieferte 12V Netzgel an der NEO U22-XJ Max an und drucken Sie den Startknopf fur 2-3 Sekunden. Die LED leuchtet dann blau.
VIII MINX NEO U22-X) Max MINX Commentator 2A) Ar Mouse 12v | B Antenna Cave HDMI Cave.
NEO U22-XJ Max si collega al televisore o al monitor del PC tramite una porta DIMMI. Passo 1: Collegare Il cavo DIMMI Allegare un'estremità del cave alla porta del TV/PC e I'altra estremità alla porta del NEO U22-XJ Max. Passo 2: Collegare ['alimentazione Collegare 'adattatore di alimentazioni 12V in dotazioni alla presa di alimentazione. Premere & tenere premuto il pulsante di accensione per 2-3 secondi per accendere, il LED di alimentazione blu dovrebbe poi accendersi.
Impostazione della lingua E possibile scegliere la lingua di sistema desiderata seguendo questi passaggi: Schermata iniziale > Impostazioni > Lingua La lingua predefinita & inglese.
Note: Questa apparecchiatura & stata testata & ovata conforme of Fimicolo il un dispositive digitale di Classe B, conformemente alla parte 15 lede regale FCC. Questa imiti sono amenti per miografo ragionevole protezione contra interferenze dannose in un‘installazione residenziale. Questa apparecchiatura genera, usa & pub Discredita energia radioattiva ©, 58 non Installata & usata In accordo con le minuzzolo, pud causare: Interferenze dannose ale radi comunicazione.
MINIS Ny Lh NEO U22-XJ Max 4K Ultra HD Android” Media Hub © oy ls Beg www, minicomputer
NEO U22-XJ Max se puede conectar Monitor de PC a través de un puerto DIMID. Paso 1: conecta el cable DIMID Conecte un extremo del cable al puerto en su Monitorio, y 8 foro extreme al puerto en NEO U22-XJ Max. Paso 2: conecte a la nocente Conecte el adaptador de alimentación de 12V suministrase a la toma de alimentación. Mantenga presionado el boten de encendido durante 2-3 segundos para encender, el LED de encendido azul se encender. Paso 3: Encienda su TV/monlior y seleccione la entrada.
Configuración del idioma Puede elegir el idioma deseado del sistema siguiendo estos pasos: Pantalla de Inicio del Lanchero > Ajustes > idioma Bl idioma predeterminado es inglés.
Nota: Este equipo ha sido probado y cumple con los limites para un dispositiva digital de Clase B, de acuerdo con la parta 15 de las Reglo de la FCC. Estos limites están disentidos para proporcionar una protección razonable contra interferencias afinas en una Instalación residencial.
