User manual

MWIPC-1510WG User Manual

System

Camera Name The default camera name is “MWIPC-1510WG”. It is

recommended to name a meaningful name for the camera.

“admin”

Password

Enter up to 4 digits password for the new user account.

Confirm Password

Enter the password again to confirm the setting.

Set Date/Time manually Display the current Date and Time.

NTP Server Synchronize the Date and Time with this NTP server.

Time Zone Select the time zone that your camera put on.

NTP Server Specify the IP Address of the NTP Server.

Upgrade Firmware You can upgrade camera’s firmware via this function. Press the

browse button, find the correct firmware and press upgrade.

Reset to Factory Defaults If you want to reset all the camera settings to default, click this

button.

Reboot Device To reboot the Internet Camera, click “Reboot”.

LED Setting There are four LEDs to indicate the status of Internet Camera. If

you wan to secure the camera from noticing, you can turn off the

LED light by clicking “LED Light OFF”. To turn on the LED light,

click “LED Light ON”.