User manual

MWIPC-1510WG User Manual

Gateway The Gateway is used to forward frames to destinations in a

different subnet on the Internet. The Gateway setting must be the

same with the gateway used by the PCs on your LAN.

DNS Server DNS Server (Domain Name Server) that translates names to IP

addresses. Set the same DNS Server as the PCs on your LAN.

Video Port The AV Control Port is used to transmit or receive the AV

streaming in the network. The default port setting is “4321”. If you

want to view the video from the camera, the port setting should

be correct.

Web Port This camera support web connection, the default web port is 80.

Since the web server may use port 80, you can use a different

port for the camera. If you change the web port from 80 to 8080,

you must type http://192.168.2.3:8080

to connect the camera

through the web browser.

Apply When you finish the “LAN”, click “Apply”.

PPPoE

Enable PPPoE Enable or disable PPPoE function of the camera.

User Name Enter the User Name for the PPPoE Connection.

Password Enter the Password for the PPPoE Connection.

MTU A maximum transmission unit (MTU) is the largest size packet or

frame, specified in octets (eight-bit bytes), that can be sent in a

packet or frame based network such as the Internet.

Apply

When you finish the “PPPoE” setting, click “Apply”.

Dynamic DNS

Enable DDNS Enable or disable DDNS function of the camera.