Installation guide

MWIPC-1510WG User Manual Copyright © 2006/2007 Minitar Corporation
3.2. Camera Ports
The Camera features three ports and a Reset button.
y Antenna
Standard reverse SMA connector where any antennas with reverse SMA connector can
connect to the Internet Camera.
y Power
The Power port is where you can connect the power adapter.
y LAN
The LAN port is where you can connect the Ethernet network cable.
y Reset
1. If problems occur with your Internet Camera, press the reset button with a pencil tip (for
less than 2 seconds) and the Internet Camera will reboot itself with your configurations.
2. If problems persist or you experience extreme problems or you forgot your password,
press the reset button for longer than 5 seconds. The Internet Camera will reset itself to
the factory default settings (warning: your original configurations will be replaced with the
factory default settings).
Reset Button LAN Port Power Jack