Installation guide

9. Please enter the default password “1234” and click “OK” to login to the IP setup page.

10. Internet Camera is working through the network (TCP/IP Protocol). The IP address setting must

be correct, or you cannot access to the camera. The wizard program will detect the IP address

status of your network automatically and suggest a free IP address for the Camera. You can

accept the suggested value or enter the value manually. If you enter the value manually, please

be aware that the “Subnet Mask” must be the same for both the camera and the PC. Click

“Finish” to apply the configuration.

11. This wizard will pop up a window to ask you if you want to run the “Camera Viewer” and see the

video of the Camera immediately. Select “OK” to run “Camera Viewer”.