User manual

Appendix D FAQ and Troubleshooting

Reset to factory default settings

There are 2 methods to reset to factory defaults.

1. Restore with the RESET button

First, turn off the router and press the RESET button in. And then, power on the router and

push the RESET button down until the M1 and or M2 LED (or Status LED) start flashing,

then remove the finger. If LED flashes about 8 times, the RESTORE process is completed.

However, if LED flashes 2 times, repeat.

2. Restore directly when the router power on

First, push the RESET button about 5 seconds (M1 will start flashing about 5 times),

remove the finger. The RESTORE process is completed.