User manual

Appendix A TCP/IP Configuration for Windows 95/98

This section introduces you how to install the TCP/IP protocol into your personal computer.

And suppose you have successfully installed one network card on your personal computer. If

not, please refer to your network card manual. Moreover, the Section A.2 tells you how to set

TCP/IP values for working with this NAT Router correctly.

A.1 Install TCP/IP Protocol into Your PC

1. Click Start button and choose Settings, then click Control Panel.

2. Double click the Network icon and select the Configuration tab in the Network window.

3. Click the Add button to add a network component into your PC.

4. Double click the Protocol to add the TCP/IP protocol.

5. Select the Microsoft item in the manufactures list. And choose TCP/IP in the Network

Protocols. Click OK button to return to Network window.

6. The TCP/IP protocol shall be listed in the Network window. Click OK to complete the install

procedure and restart your PC to enable the TCP/IP protocol.