User manual

Example:

Configuration on NAT Router

Destination SubnetMask Gateway Hop

Enabled

192.168.1.0 255.255.255.0 192.168.123.216 1 ˇ

192.168.0.0 255.255.255.0 192.168.123.103 1 ˇ

So if, for example, the client3 wanted to send an IP data packet to 192.168.0.2, it would use

the above table to determine that it had to go via 192.168.123.103 (a gateway),

And if it sends Packets to 192.168.1.11 they will go via 192.168.123.216

Each rule can be enabled or disabled individually.

After the routing table settings are configured, click the save button.