User manual

4.7.5 Routing Table
Routing Tables allow you to determine which physical interface address to use for outgoing IP
data packets. If you have more than one router and subnets, you will need to enable the
routing table to allow packets to find the proper routing path and allow different subnets to
communicate with each other.
The Routing Table settings are settings used to setup the functions of static routing.
Static Routing: For static routing, you can specify up to 8 routing rules. You can enter the
destination IP address, subnet mask, gateway and hop for each routing rule, and then enable
or disable the rule by checking or unchecking the Enable checkbox.
MNWAPGR User Manual Copyright © 2005 Minitar Corporation
45