User manual

4.6.4 MAC Address Control

MAC Address Control allows you to assign different access right for different users and to

assign a specific IP address to a certain MAC address.

MAC Address Control Check “Enable” to enable the “MAC Address Control”. All of the

settings in this page will take effect only when “Enable” is

checked.

Connection control Check "Connection control" to enable the controlling of which

wired and wireless clients can connect to this device. If a client

is denied connection to this device, it means the client can't

access the Internet either. Choose "allow" or "deny" to allow or

deny the clients whose MAC addresses are not in the "Control

table" (please see below).

Association control Check "Association control" to enable the controlling of which

wireless client can associate to the wireless LAN. If a client is

denied association to the wireless LAN, it means the client can't

send or receive any data via this device. Choose "allow" or

"deny" to allow or deny the clients, whose MAC addresses are

not in the "Control table".