User manual

4.1 Start-up and Log in

Activate your browser and either disable the proxy or add the IP address of this product

into the proxy exceptions list. Then, type this product’s IP address in the Location (for

Netscape) or Address (for IE) field and press ENTER. For example: http://192.168.123.254.

After the connection is established, you will see the web user interface of this product. There

are two modes of the web user interface: one for general users and one for system

administrator.

To log in as an administrator, enter the system password (the factory setting is ”admin”) in

the System Password field and click on the Log in button. If the password is correct, the web

mode will be changed into administrator configuration mode. As listed in the main menu, there

are several options for system administration.