Installation Instructions

CK910B MANUAL

1. Install the battery according to the label ON the battery case ON

the back of the keyboard. Flip the switch ON the back of the

keyboard to ON

（

See picture below

）

2. Open the Bluetooth application on the host and clear the paired

Bluetooth keyboard to avoid the same ID : MINI-CK910B;

3. Make the Bluetooth keyboard enter tihe pairing state.Press the ID

pairing key,and the pairing indicator blinks(See picture below);

4. Enter the Search state for the Bluetooth device on the host side

and find the Bluetooth keyboard with the name

“

Mini-CK910B

”

Click

the searched device and connect it(no password is required for

bluetooth 3.0 or above)

Notice:

1. If the keyboard operation is not sensitive, please replace the

battery in time .

2. Remove the battery if it si not used for a long time.

PAGE 1
CK910B MANUAL 1. Install the battery according to the label ON the battery case ON the back of the keyboard. Flip the switch ON the back of the keyboard to ON（See picture below） 2. Open the Bluetooth application on the host and clear the paired Bluetooth keyboard to avoid the same ID : MINI-CK910B; 3. Make the Bluetooth keyboard enter tihe pairing state.Press the ID pairing key,and the pairing indicator blinks(See picture below); 4.
PAGE 2
Technical parameter Keyboard input: ; FCC Warnning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 3
the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.