User Guide

www.mininder.com 1 of 7
minifinder
xtreme
Quick Guide
INTRODUCTIONINTRODUCTION
The goal of this quick guide is to help you get started with your MiniFinder® Xtreme and live track-
ing of your asset via MiniFinder GO Tracking System in the shortest possible time.
HARDWARE REVIEWHARDWARE REVIEW
CB
LED Light
Magnets
Function Key
To charge the battery in the GPS tracker, unscrew the small metal cap on the side of the unit and
connect the power adapter.
A
Here shows an LED light that indicates the status of the unit in three different colors, red,
blue and purple.
B
C
Here shows the bottom of the unit. The two enclosed steel plates are two super magnets. The
button in the middle is a “Function key” which is activated when i.e. an unauthorized person
dismantles the device. The owner is notied via MiniFinder GO about “Function key” being
activated. The alarm button is congured in the MiniFinder GO system.
CHARGINGCHARGING
A
B
Unscrew the small metal cap on the side of the unit
with hand or a small screwdriver.
Insert the power adapter into the unit’s connector as
shown on the right. Then plug the adapter into the
power outlet to start charging.
For the rst time charging, the battery should be charged between 8h to 12h. When charging for
the next time, device is fully charged after approx. 4h.
A
Power Connector
Metal Cap