MiniFinder® Pico 4G User Manual English Updated: 2020/11/18 © 2020 MiniFinder® All rights reserved
minifinder pico 4G User Manual Thank you! Thank you for purchasing a MiniFinder® product. We believe you made the right choice. MiniFinder® Pico 4G is full of smart features that help you monitor, protect and locate your loved ones remotely. Before you start using your Pico 4G, please read this manual in its entirety. PACKAGE CONTENTS 1. Pico 4G 2 1 3 2. Magnetic Charging Cable 3. Power Adapter PRODUCT OVERVIEW 1. On/Off & Call Button 2. Voice Message Button 3. Panic Button (SOS) 4. Microphone 5.
minifinder pico 4G User Manual PRODUCT MANAGEMENT A. Please charge your device for 4 hours before using for the first time. B. During charging, the blue LED is steady. C. Red LED light goes out when fully charged. D. START the unit by pressing ON/OFF button for 3 seconds. E. TURN OFF the device by pressing and holding SOS and ON/OFF buttons for 2 seconds. Place the magnetic charging cable to the charging pins to charge. See the picture below. Speaker Speaker Charging Pins www.minifinder.
minifinder pico 4G User Manual EXPLANATION OF LED LIGHTS GREEN LED: 1 sec 1 sec 1 sec Slow blink = Calling 3 sec Single blink = Searing GSM network 3 sec Double blink = Connected to GSM network 3 sec Slow blink = Charging RED LED: 3 sec Single blink = Connected to Bluetooth Steady blink = Fully charged Press the On / Off button once when the device is on, the light indicates the approximate battery life. 5 flashes = about 100%, 4 flashes = about 80%, and down to 1 flashes = about 20%.
minifinder pico 4G User Manual EXPLANATION OF VOICE NOTIFICATIONS 1. “Your mobile alarm is charging” = Pico 4G starts charging. 2. “Your alarm has been activated, press the SOS button to stop” = Pico 4G has detected an SOS / panic alarm. Click the SOS button to cancel the alarm. Voice is repeated 3 times. 3. “Battery is low, please recharge your battery” = Pico 4G has low battery level. Voice is repeated 3 times. 4.
minifinder pico 4G User Manual APP Overview After logging in the MiniFinder GO APP, you will see the view as shown below. This consists of 10 different parts: 1. Menu (Device list) 2. Alarm notification 3. Create / Edit GeoFence 4. Applications settings 5. Application info & Help 6. View the position of my mobile phone 7. Zoom in / out 8. View street information of a selected GPS device 9. GPS device location indication on the map 10.
minifinder pico 4G User Manual Device Status A GPS unit can have three different colors indicating status. Green (Online), Orange (Passive), Red (Passive) and White (Offline). A) Green: The device is online and sending position right now. B) Orange: The device is passive and has sent last position more than 10 minutes ago. C) Red: The device is passive and has sent last position more than 1 hour ago. D) White: The device is offline.
minifinder pico 4G User Manual Action Menu At the far right of the row of units is an Action Menu (three vertical points). In the Action Menu you can see history (History), call (Call), activate live tracking (Live tracking) and change settings (Setup). Pico 4G History See positioning history on the map based on date and time. - Start by clicking Action Menu (1), then click “History” (2). Pico 4G www.minifinder.
minifinder pico 4G User Manual - Select a time period and then click “View History” to display the device’s positioning history. - The following information is displayed for positioning history: 1. A is the start position 2. B is the end position 3. Indicates a particularly selected position 4. The start date and time 5. The end date and time 6. Drag the blue dot to see a particular position (3) on the map. www.minifinder.
minifinder pico 4G User Manual - When bringing up the sub screen, the detailed statistics are shown, including total distance, total time and max speed. To clear the selected history, simply click “Clear History” Call the Device To ring your device from your telephone, simply click on Action Menu (1) and then click on “Call” (2) to start calling. Pico 4G www.minifinder.
minifinder pico 4G User Manual Live Tracking Live tracking allows users to track their MiniFinder Pico 4G in real time in a quick and easy way over a short period of time. By clicking on Action Menu (1) and then Live Tracking (2), the position update intervals change to 10 seconds for 10 minutes. After that, the tracking returns to the previous selected position update interval. Pico 4G Rename Device Edit device name through Device Setting. Click the Action Menu (1) and then click on the “Setup” (2).
minifinder pico 4G User Manual Authorize Telephone Numbers To be able to call or receive calls from the device, one or more phone numbers need to be authorized in the device. Telephone number 1 is used as the first alarm receiver of the panic alarm (SOS button). Only phone number 2 receives calls from the call button. - Open MiniFinder GO APP, click the Action Menu (1) and then click on the “Setup” (2). NOTE! All MiniFinder devices include a roaming-free SIM card with a foreign telephone number.
minifinder pico 4G User Manual Fall Alarm An accidental fall can cause devastating consequences. When an accidental fall occurs, the MiniFinder remote sensor sends an alarm to the APP in the form of an alarm notification on the mobile device’s screen and an alarm bell in the APP. Pico 4G - To enable the Fall Alarm, click the Action Menu (1) and then select “Setup” (2). - Activate “Fall Alarm” (3) and drag the circle to a desired sensitivity (4), then click ”Apply”(5) to save.
minifinder pico 4G User Manual SOS After SOS function is activated, an alarm notification is sent to the MiniFinder GO APP if the SOS / panic alarm is activated on the device. The alarm is followed up with telephone calls to authorized telephone numbers or a local alarm center. To enable SOS, click the Action Menu and then select “Setup”, and activate “SOS” according to the image above and click ”Apply” to save the settings. MiniFinder Pico 4G rings the phone for 20 seconds.
minifinder pico 4G User Manual Speeding Alarm Click Action Menu (1) of the device that you want to set Speeding Alarm to, and then click “Setup” (2). Activate ”Speeding Alarm” (1). Drag the circle to a desired speed (2). Finally, click “Apply” (3) to set the alarm for speeding. Speaker Volume Click the action menu in the device list for the device you want to set up the speaker volume, and then click “Setup”.
minifinder pico 4G User Manual Power Saving Mode Power Saving Mode is an effective way to optimize battery life. GPS and GSM modules will only be activated in case of an alarm or event occurs, otherwise, stay deactivated. Enable Power Save by clicking on the Action Menu and then selecting “Setup”. Turn on “Power save” and then click “Apply” to save the settings. Position Update Interval The device can be tracked by different time interval depending on different requirements.
minifinder pico 4G User Manual Comments In the comment section, you can add additional information about your MiniFinder. To create a comment: - Click on the action menu and then click on “Comment”. - Enter your comment in “Write comment” and then click “Save”. 1 2 www.minifinder.
minifinder pico 4G User Manual Geofence Alarm Geofence is a virtual limited area on the map. When a GPS device leaves a defined area, an alarm notification, a ringing and an e-mail are sent according to the preferences in the setting. 1) Create a GeoFence - Start by clicking on the Geofence tab (1) and click “Create” (2) as shown below. - Then draw an area as a GeoFence on the map. A) Press once on the map as starting point of the area. B) Press again to place the second point of the area.
minifinder pico 4G User Manual 2) Edit a GeoFence - Start by clicking on the GeoFence tab (1) as shown below. Then click “Edit” (2). - In the list, select a GeoFence that you want to edit (3). - To delete a Geofence, click on the dustbin (4). - Create/Change a Geofence area’s name (5) in the text field. - Click on “Edit area” (6) to edit the area’s size or location. - Select “Enter”(7) or “Leave”(8) or both to create an alarm - Select (9) the units to be affected by the area.
minifinder pico 4G User Manual Tag Function (Mark Places) On the map in the MiniFinder GO APP, you can mark places with particular information. - Long press on the place where you want to mark on the map. (1) - You can give a name (2), a description (3), an icon (4) on the map and even attach an image (5). - Press “Create” (6) to save. 1 - Press the icon on the map (1) to edit the marked place and save the changes (2) or delete (3). 1 www.minifinder.
minifinder pico 4G User Manual APP Settings - Click on the gear symbol to make settings in the MiniFinder GO APP. - Settings Menu. 1. Number of licenses and your username. 2. Change your password. 3. Map selector (Classic, Hybrid, Terrain and Satellite) 4. “Keep Screen Alive” keeps your mobile device’s screen on until it is turned off manually. The setting may involve increased battery usage for your mobile device depending on settings. 5. “Tooltip” shows information of your GPS above the map pin.
minifinder pico 4G User Manual User Manuals - Click on the “i” symbol to read more information about MiniFinder GO and get access to the user manuals for all our products. - Press on “MiniFinder GO Documentation” (1). - Press on “Select Device” (2) and select which device’s user manual (3) you would likt to read. - Press on “Download” (4) to download the user guide for selected device. www.minifinder.
minifinder pico 4G User Manual MEMORY FUNCTION The unit has a built-in 1 MB flash memory. The memory stores GPS information when coverage of GSM networks is omitted (eg in sparsely populated areas, indoors, underground locations, etc.). Stored positioning data is automatically transmitted as soon as GSM coverage is available again. This function depends on the additional service of MiniFinder GO. Contact your dealer for more information.
minifinder pico 4G User Manual RECYCLING INFORMATION The symbol on the product or its packaging means that this product must be disposed of separately from ordinary household wastes at its end of life. Please be aware that this is your responsibility to dispose the electronic equipment at recycling centers to help conserve natural resources. Each country in the European Union should have its collection centers for electrical and electronic equipment recycling.
minifinder pico 4G User Manual TECHNICAL SPECIFICATION Dimensions 61mm x 44mm x 16mm Weight 40g Battery Rechargeable, 3.7V 850mAh Power source 5V DC Frequency band for GSM LTE-FDD B1/B3/B7/B8/B20 GSM/GPRS.EDGE 900/1800MHZ GPS chip uBlox MAX M8 (AGPS support) Fixed time against GPS Active 1s, Warm 5s, Cold 15s GPS sensitivity Warm -148dBm, Cold -162dBm WiFi 802.11 b/g/n, 2.4G Bluetooth BT5.
minifinder www.minifinder.
