User manual

miniDSP Ltd, Hong Kong / www.minidsp.com / Features and speci fi cations subject to change without prior noti ce 46
9. Click the Erase-Program-Verify button. The progress bar will update. After some time, the status will
update to show successful completion.
DO NOT DISCONNECT THE USB CABLE OR POWER FROM THE NANOAVR DL WHILE THIS IS IN
PROGRESS. DOING SO MAY “BRICK” YOUR NANOAVR DL.
10. Click the Run Application button to reboot the nanoAVR DL.
11. Click the Disconnect button
12. Close the PIC32 Bootloader application window.
6.6 OBTAINING SUPPORT
1. Check the forums on miniDSP.com to see if your issue has already been raised and a solution or solutions
provided.
2. Contact miniDSP via the support portal at minidsp.desk.com with:
a. The product information obtained from nanoAVR DL Utility (About button) and Dirac Live Calibration
Tool for miniDSP (Sound System tab).
b. A clear explanation of the symptoms you are seeing.
c. A description of the troubleshooting steps (see Troubleshooting above) you performed and the results
obtained.