User manual

miniDSP Ltd, Hong Kong / www.minidsp.com / Features and speci fi cations subject to change without prior noti ce 12
2.1.3 License activation
1. If you are running the Dirac Live Calibration Tool already, quit from that program. (You cannot run this
program and the NanoAVR DL Utility program at the same time.)
2. Start the NanoAVR DL Utility program. It will appear as shown on the left below.
3. Connect your nanoAVR DL processor to your computer via USB, then click on the Connect button. It will
change to a green tick.
4. Click on Get Activation Serial Number. The program will get your unique serial number from the connected
nanoAVR and display it, as shown on the right above.
5. Using this serial number, activate your license on the miniDSP Dirac Live activation page:
http://www.minidsp.com/dirac-series/activate/#activate
If you have not purchased a Dirac Live license before, use the New User screen on the left. If you have
previously activated one or more Dirac Live licenses, use the screen on the right.