User manual

miniDSP Ltd, Hong Kong / www.minidsp.com / Features and speci fications subject to change wi thout pri or noti ce 47
7 ADDITIONAL INFORMATION
7.1 THE DDRC-88 UTILITY PROGRAM
The DDRC-88 Utility program is an auxiliary program for configuring certain functions of the DDRC-88A. It is not
used for measurement or calibration.
Master volume
Displays the current master volume setting.
Mute
Mutes all audio output.
Connect/Connected
Click on the Connect icon to connect to the DDRC-
88A. To disconnect, quit from the DDRC-88 Utility.
Get Activation Serial Number
Click to get the unique activation serial number for
this unit. See License activation on page 12.
Refresh DSP Program
Updates the internal DSP program with the version
contained in the DDRC-88 Utility. Use this after
downloading a new version of DDRC-88 Utility.
Restore All to Default
Clears all four loaded filter presets.
About
Provides the current versions of DSP firmware. Please provide this information when submitting
a support ticket at minidsp.desk.com.
Reset I/P Volume
Resets all Channel volume sliders to the default.
Upgrade Firmware
Starts the MCU firmware upgrade process. See MCU firmware update on page 51.
IR Learning
Buttons used to learn infrared remote control codes. See Infrared remote control on page 37.
Be sure to quit Dirac Live Calibration Tool For miniDSP before starting the DDRC-88 Utility program.
Running both programs at the same time may result in communication conflicts and odd behavior.