User manual

miniDSP Ltd, Hong Kong / www.minidsp.com / Features and speci fications subject to change wi thout pri or noti ce 13
Notes:
1. The serial number that must be entered in the activation screen is not the serial number printed on the
hardware unit. A unique activation serial number for Dirac Live is programmed into the firmware of each
unit and can only be accessed with the DDRC-88 Utility program (step 4 above).
2. The email address used during license activation is not related to your user account on miniDSP.com. To
activate and validate a Dirac Live license, you must create a separate account on the Dirac server using the
form shown at left in step 5 above.
3. If you purchase more than one DDRC-88A or Dirac Series processor, each will need to be activated with its
unique serial number. Use the form shown on the right in step 5 above and enter the activation serial
number of each additional processor, and they will in turn be added to your license.
2.1.4 License validation
Start the Dirac Live Calibration Tool For miniDSP program. It will ask you to validate your software license. Enter
the email address and password that you used when activating your license, and then click on Validate:
You will need to be connected to the Internet to validate your license. Any active firewalls will need to have
HTTP (normal web traffic) enabled.
The Username that you enter in the validation screen must be the email address that you used in the
activation screen in step 5 on page 12. It is not your miniDSP website username.