User manual

miniDSP Ltd, Hong Kong / www.minidsp.com / Features and speci fications subject to change wi thout pri or noti ce 12
2.1.3 License activation
1. If you are running the Dirac Live Calibration Tool already, quit from that program. (You cannot run this
program and the DDRC-88 Utility program at the same time.)
2. Start the DDRC-88 Utility program. It will appear as shown on the left below.
3. Connect your DDRC-88A processor to your computer via USB, then click on the Connect button. It will
change to a green tick.
4. Click on Get Activation Serial Number. The program will get your unique serial number from the connected
DDRC-88A and display it, as shown on the right below.
5. Using this serial number, activate your license on the miniDSP Dirac Live activation page:
http://www.minidsp.com/dirac-series/activate/#activate
If you have not activated a Dirac Live license before, use the New User screen on the left. If you have
previously activated one or more Dirac Live licenses, use the screen on the right.