User manual

PRELIMINARY
miniDSP Ltd, Hong Kong / www.minidsp.com / Features and specifications subject to change without prior notice 35
6 ADDITIONAL INFORMATION
6.1 SPECIFICATIONS
Computer connectivity
Driverless USB 2.0 control interface for Windows and Mac OS X
Ethernet control (RJ45 / 100Mbps) with ZeroConf support (autoIP/DHCP)
HDMI inputs
2 x HDMI 1.4a selectable from software, front panel or IR remote
HDMI Outputs
1 x HDMI 1.4a output
Audio sample rate /
Resolution
Input/output resolution: 24-bit integer, 8-channel linear PCM
Maximum input sample rate: 192kHz
DSP internal processing path: 48 kHz
Audio processing
32-bit floating-point processor
Video support
Video pass-through of selected source (i.e. no video processing)
36-bit / 3D support / HDCP embedded keys
Storage/Presets
4 filter sets stored, selectable from front panel or IR remote
Infrared remote
“Learning remote” capabilities (NEC, Philips, Sony, Apple)
Controls master volume, mute, HDMI input selection, filter set selection, Dirac
Live® filtering bypass
Power supply
5 VDC single supply @ 600mA, 2.1 mm center-positive
Dimensions (H x W x D)
31 x 161 x 110 mm
6.2 TROUBLESHOOTING
The following table lists the most common causes of issues with the nanoAVR DL. If following this table does not
provide a solution, see Obtaining Support below.
Item#
Symptoms
Troubleshooting recommendation
1
The nanoAVR doesn’t appear
in the Sound System tab
a. Check that the USB cable to the nanoAVR DL is firmly
connected.
b. Check that you do not have any other program running that is
attempting to communicate with the nanoAVR DL, such as the