User manual

PRELIMINARY
miniDSP Ltd, Hong Kong / www.minidsp.com / Features and specifications subject to change without prior notice 33
5 USING THE NANOAVR DL HDMI AUDIO PROCESSOR
Once the desired correction filters have been downloaded into the NanoAVR DL HDMI audio processor, the
computer is not required and can be disconnected. The front panel and/or an infrared remote can be used to
control:
 Filter set selection
 HDMI input selection
 Master volume (remote control only)
 Master mute (remote control only)
 Dirac Live® filtering bypass(remote control only)
5.1 STATUS INDICATORS
The current status of the nanoAVR DL is indicated by a set of LEDs:
Preset Indicates the currently selected filter set (1 through 4).
Input Indicates the currently selected HDMI input (1 or 2).
M Master mute is enabled.
B Dirac Live® filtering is bypassed.
5.2 FRONT PANEL CONTROLS
The nanoAVR uses a minimalist physical control design with a single control button.
To change the selected filter set
Briefly press the control button. The selection LED blinks quickly. Briefly press the button to
move to the next filter set, and repeat until the desired LED is lit. Press and hold the control
button, and the LED will now remain steady.
To change the selected input
Press and hold the control button. The LED indicating the selected HDMI input will switch to the
other input. Release the button.