User manual

PRELIMINARY
miniDSP Ltd, Hong Kong / www.minidsp.com / Features and specifications subject to change without prior notice 26
The graphs showing all nine measurements are useful for seeing how much variation is shown across the
listening area:
To display the impulse response instead of the magnitude response, click on the Impulse button at the top left
of the display. As with the magnitude response, the average measurement can be shown as well as all nine
measurements. The predicted responses after correction can be viewed after filters are generated (see
Generating correction filters below).
To return to the magnitude response, click on the Spectrum button.
4.1 WORKING WITH GRAPHS
The set of tabs to the right controls which channels are shown on the graphs. Initially, the left and right front
channels are shown and by default, the front left and right, surround left and right, and rear left and right
channels are linked, as indicated by the small “chain” icons. (When two or more channels are linked, they all
share the same target curve – see Designing your target curve below).