User manual

PRELIMINARY
miniDSP Ltd, Hong Kong / www.minidsp.com / Features and specifications subject to change without prior notice 19
3.3.1 Sound System tab
On the Sound System tab, set the following parameters.
Choose system configuration
Use the dropdown menu to select your system configuration. For multi-channel use, usually 5.1
or 7.1 will be selected. If you have a system configuration other than 5.1 or 7.1, use the Custom
System option (see Custom System configuration below).
Test signal playback device
Preset to nanoAVR (miniDSP Ltd). This will ensure that test signals are sent into your audio
system via the NanoAVR DL processor. (If this is not present, check that your NanoAVR DL
processor is connected via USB and powered on, and click the Rescan button.)
Once you have verified that this screen is correct, click the Proceed button.