User manual

PRELIMINARY
miniDSP Ltd, Hong Kong / www.minidsp.com / Features and specifications subject to change without prior notice 18
3.3 CONFIGURING FOR MEASUREMENT
Start Dirac Live Calibration Tool For miniDSP (if it is not already running).
Ensure that no other programs are running that may attempt to communicate with the nanoAVR DL
hardware unit, such as the nanoAVR DL utility or the nanoAVR plugin, as this may result in
communication conflicts or other errors.
Logo and status progress bar
This area shows a progress bar with current status when the program is performing calculations.
Screen selection tabs
Each tab selects a screen that is shown in the main display area. These are generally worked
through in order, from top to bottom. This section covers the first four tabs; the final two are
covered in Filter Design.
Load and save a project
Each measurement project can be saved to a file and reloaded at a later time. See Saving and
loading projects.
Back to previous / proceed to next
Use these two buttons to advance to the next screen when each is complete, or to go back to
the previous screen to make alterations. The tabs at the left can also be clicked on directly.
Help open/close
Click on the small Help divider at the right of the screen to open a pane with help on the
currently selected tab. Click on the divider again to close the help pane.