User manual

PRELIMINARY
miniDSP Ltd, Hong Kong / www.minidsp.com / Features and specifications subject to change without prior notice 10
1.3 NANOAVR DL / DIRAC LIVE® CONFIGURATION STEPS
The steps for configuring the NanoAVR DL HDMI audio processor with Dirac Live® to optimize your home theater
system is summarized as follows:
1. Connect the NanoAVR DL audio processor into your system and
install software. See Section 2, Installation and Setup.
2. Run a series of acoustic measurements using the Dirac Live
Calibration Tool For miniDSP program, to capture the acoustic
behavior of your speakers and room. See Section 3, Acoustic
Measurement.
3. Generate digital room correction filters that will be executed by
the NanoAVR DL processor. Up to four filter sets can be
downloaded into the processor for easy real-time recall and
auditioning. See Section 4, Filter Design.
4. Once the digital room correction filters are designed and
downloaded, the computer can be disconnected, as computer
connectivity is not required for normal listening. See Section 5,
Using the NanoAVR DL HDMI audio processor.