Switch User Manual

To connect
the RICC SUN
1.
Connect the Screen connector to the computer’s video card.
2.
Connect the Keyboard connector to the computer’s Keyboard port
2.7
Connecting to the Network
B
efore powering on Smart 108/116 IP
network.
To connect the
Smart 108/116 IP
1. C
onnect the network cable to the LAN port of
2.8
Connecting the CAT5
Perform the following procedure for each computer to which you want to connect
CAT5 cables.
To connect the
CAT5 cables
1. Connec
t one connector to the RICC/ROC
2.
Connect the other connector to one of the Smart 108/116 IP
2.9
Connecting the
You can connect a KVM console to Smart 108/116 IP
locally.
To connect
a KVM console to Smart 108/116 IP
1.
Connect the monitor’s connector to the Smart 108/116 IP’s Monitor por
2.
Connect the keyboard’s connector to the Smart 108/116 IP’s Keyboard port.
3.
Connect the mouse’s connector to the Smart 108/116 IP’s Mouse port.
Connecting
Figure 10 – RICC SUN
the RICC SUN
:
Connect the Screen connector to the computer’s video card.
Connect the Keyboard connector to the computer’s Keyboard port
.
Connecting to the Network
efore powering on Smart 108/116 IP
, you can c
onnect the Smart 108/116 IP
Smart 108/116 IP
to the network:
onnect the network cable to the LAN port of
the
Smart 108/116 IP
Connecting the CAT5
Cables
Perform the following procedure for each computer to which you want to connect
CAT5 cables
:
t one connector to the RICC/ROC
RJ45 port.
Connect the other connector to one of the Smart 108/116 IP
c
omputer ports
Connecting the
KVM Console
You can connect a KVM console to Smart 108/116 IP
, in order to
operate the system
a KVM console to Smart 108/116 IP
:
Connect the monitor’s connector to the Smart 108/116 IP’s Monitor por
Connect the keyboard’s connector to the Smart 108/116 IP’s Keyboard port.
Connect the mouse’s connector to the Smart 108/116 IP’s Mouse port.
Installation
Connecting
to the Network
User Guide | 21
onnect the Smart 108/116 IP
to the
Smart 108/116 IP
.
Perform the following procedure for each computer to which you want to connect
omputer ports
.
operate the system
Connect the monitor’s connector to the Smart 108/116 IP’s Monitor por
t.
Connect the keyboard’s connector to the Smart 108/116 IP’s Keyboard port.
Connect the mouse’s connector to the Smart 108/116 IP’s Mouse port.