Computer Accessories User Manual

USER GUIDE
18
Note! If a DHCP server later becomes available, the unit picks up the IP settings
from DHCP server. To keep the static IP address, disable DHCP – explained in
section 11.1 on page 21.
9.1 Static IP addresses for a number of units
Where you want to connect more than 1 SmartRack 116 IP to the same network
and there is no DHCP server, or you want to use static IP addresses, do the
following:
Connect the SmartRack 116 IP units one at a time and change the static IP address
of each unit before connecting the next unit.