User guide

OPERATING GUIDE.

Section 2: Operating the Smart 16 IP

system locally

This section explains how to operate the Smart 16 IP Switching system locally

through the On Screen Display (OSD) or Control software.

39. Switching between computers

Switch between the connected computers by either:

• Keyboard hotkeys

• The OSD (On Screen Display)

• Control software

The OSD / Control software is also the place to adjust various settings as

explained below.

40. The keyboard hotkeys

To switch to the next computer forwards press Shift then, +. Release Shift, before

pressing +.

To switch to the next computer backwards press Shift then, -. Release Shift,

before pressing -.

Note! With a US English keyboard you can use the + key of the alphanumeric

section or of the numeric keypad. With a Non-US English keyboard only use the

+ key of the numeric keypad.

41. The OSD

To display the OSD:

Press Shift twice. The OSD Main window appears. See

Port number

appears here

Instruction

keys

C=compute

S=switch