User guide

Operating
the SmartRack 116 IP Switching System Locally
Upgrading
the SmartRack 116 IP Firmware
82 | SmartRack 116 IP
Figure
3. Click .
The hardware version of the Translator appears
Figure
RICC/ROC Version
Before you can select
a RICC/ROC, you must
To verify the RICC/ROC version number:
1. Select
one or more or all of the RICC/ROCs.
2. Click .
The firmware version number appears.
3. Click .
The hardware version number appears.
When “Not responding” appears,
that it is switched off.
the SmartRack 116 IP Switching System Locally
the SmartRack 116 IP Firmware
Figure
85 – Firmware Version Report
The hardware version of the Translator appears
.
Figure
86 – Hardware Version Report
a RICC/ROC, you must
clear the 116 IP Switch
check
To verify the RICC/ROC version number:
one or more or all of the RICC/ROCs.
The firmware version number appears.
The hardware version number appears.
When “Not responding” appears,
it indicates that no computer is
connected, or
check
box.
connected, or