User guide

Button/Box Funct
ion
Displays
SmartRack 116 IP
Name of Update file
2. I
nstall the software on the computer’s hard drive
3. T
o change the Com Port from the Options menu
The Communication
Port Dialog box appears.
Figure
4. Choose the Com Port
that
6.3.7 Verifying the V
ersion
Before upgrading the firmware, you must verify which firmware and hardware
versions you have.
SmartRack 116 IP
Switch
To verify the
SmartRack 116 IP
1. Select the
Manager Unit
2. Click .
The firmware versions of the Translator, Master
Operating
the SmartRack 116 IP Switching System Locally
Upgrading
the SmartRack 116 IP Firm
ion
Displays
the
communication status between the upgrade software and the
SmartRack 116 IP
. Choose Options/Get Status
to refresh the status
Name of Update file
nstall the software on the computer’s hard drive
.
o change the Com Port from the Options menu
, choose Com Port
.
Port Dialog box appears.
Figure
84 – Communication Port Dialog Box
that
the RS232 Serial cable is connected to,
and click
ersion
Numbers
Before upgrading the firmware, you must verify which firmware and hardware
Switch
Version
SmartRack 116 IP
Switch version:
Manager Unit
checkbox.
The firmware versions of the Translator, Master
, and OSD appear.
the SmartRack 116 IP Switching System Locally
the SmartRack 116 IP Firm
ware
User Guide | 81
communication status between the upgrade software and the
to refresh the status
.
.
and click
OK.
Before upgrading the firmware, you must verify which firmware and hardware