User guide

6.3.3
Connecting the
To update the firmware,
the
switched on.
6.3.4
Connecting the RS232 Download
To run the Update software,
5CB40419) to the computer containing the software, and to the
Switch Flash port.
6.3.5
Installing the Software
To install the Update software:
1.
Download the software from the Support section of Minicom’s website.
2.
Install the software on the computer’s har
Operating
the SmartRack 116 IP Switching System Locally
Upgrading
the SmartRack 116 IP Firmware
Connecting the
SmartRack 116 IP System
the
SmartRack 116 IP
system must be connected and
Connecting the RS232 Download
Cable
To run the Update software,
you must
connect the RS232 Download cable (p/n
5CB40419) to the computer containing the software, and to the
SmartRack 116 IP
Figure 82 – RS232 Cable
Installing the Software
To install the Update software:
Download the software from the Support section of Minicom’s website.
Install the software on the computer’s har
d drive.
the SmartRack 116 IP Switching System Locally
the SmartRack 116 IP Firmware
User Guide | 79
system must be connected and
connect the RS232 Download cable (p/n
SmartRack 116 IP
Download the software from the Support section of Minicom’s website.