User guide

Operating
the SmartRack 116 IP Switching System Locally
Using the OSD
76 | SmartRack 116 IP
Figure
All the functions listed in the Help window can be performed from the Main
window. The Help window is merely a reminder of the hotkeys and their
functions.
Scanning
Computers (F4)
When necessary, you can
adjust the scan time in the Time Settings window
78).
To activate scanning:
1. Press Shift
twice to open the OSD.
2. Press F4.
Your screen displays each active computer sequentially, with the Scan label
appearing in the top left corner.
To deactivate scanning:
1. Press F4.
Tuning (F5)
You can tune the image of any computer screen from the
accessed from the
Main window (see
To
adjust the screen image
1.
Navigate to the computer
2. Press F5.
The screen
image of the selected computer appears, together with the
Tuning label.
3. Use the Right and Left
arrow keys to adjust the image
the SmartRack 116 IP Switching System Locally
Figure
81 – The OSD HELP Window
All the functions listed in the Help window can be performed from the Main
window. The Help window is merely a reminder of the hotkeys and their
Computers (F4)
adjust the scan time in the Time Settings window
twice to open the OSD.
Your screen displays each active computer sequentially, with the Scan label
appearing in the top left corner.
You can tune the image of any computer screen from the
Select Computer
Main window (see
Section 6.2.2).
adjust the screen image
:
Navigate to the computer
that you want to adjust.
image of the selected computer appears, together with the
arrow keys to adjust the image
.
All the functions listed in the Help window can be performed from the Main
window. The Help window is merely a reminder of the hotkeys and their
adjust the scan time in the Time Settings window
(Figure
Your screen displays each active computer sequentially, with the Scan label
Select Computer
window,
image of the selected computer appears, together with the
Image