User guide

Operating
the SmartRack 116 IP Switching System Locally
Using the OSD
74 | SmartRack 116 IP
Figure
Users
is only enabled i
Security Settings
section
There are three different access levels:
 Y –
Full access to a particular computer
functions.
 V –
Viewing access only to a particular computer (
functionality).
 N – No access to a
particular computer
attempted.
To give each user the desired access level:
1.
In the Users Settings window, n
column.
2.
Toggle between the options using the
6.2.8
Configuring the Security Settings
To
configure the security settings
1.
In the OSD Settings window (see
line is on it, and press
Enter
The Security Settings wi
ndow
the SmartRack 116 IP Switching System Locally
Figure
79 – Users Settings Window
is only enabled i
f the security status is set to On (see the
Configuring
section
on page 69).
There are three different access levels:
Full access to a particular computer
plus access to the F4, F5,
and
Viewing access only to a particular computer (
n
o keyboard/mouse
particular computer
; a
TIMEOUT label appears if access is
To give each user the desired access level:
In the Users Settings window, n
avigate to the desired computer line and
Toggle between the options using the
Space bar.
Configuring the Security Settings
configure the security settings
:
In the OSD Settings window (see
Figure 75), navigate to SECURITY
so that the red
Enter
.
ndow
appears.
Configuring
and
F6 OSD
o keyboard/mouse
TIMEOUT label appears if access is
avigate to the desired computer line and
User
so that the red