User guide

To
change the keyboard language
1.
In the General settings window
line.
2. Press
the Space bar to toggle between
Editing the Switch Name
The Switch name is displayed under
Figure 76).
You can substitute up to 18 characters in the line
character. When there is more than one switch in the system
a different name.
Restoring O
SD to Factory Defaults (F7)
In the
General settings window
to its
factory default settings.
Restorin
g factory d
made.
6.2.5
Configuring the Port
From the Ports settings window, you can configure the following:
 The Computer name

The Keyboard settings
To configure the ports
settings
1.
In the OSD Settings window
line is on it, and p
ress
The Ports Settings wi
ndow
Operating
the SmartRack 116 IP Switching System Locally
change the keyboard language
:
In the General settings window
(see Figure 76), navigate to the
Keyboard Language
the Space bar to toggle between
the available options.
Editing the Switch Name
The Switch name is displayed under
Switch Name in the
General settings window
You can substitute up to 18 characters in the line
; a space
is considered
character. When there is more than one switch in the system
,
give each Switch’s OSD
SD to Factory Defaults (F7)
General settings window
(see Figure 76), you can press F7 to re
store
factory default settings.
g factory d
efault settings erases all changes that have
previously
Configuring the Port
s Settings
From the Ports settings window, you can configure the following:
The Keyboard settings
settings
:
In the OSD Settings window
(see Figure 75), navigate to PORTS
so that the red
ress
Enter.
ndow
appears.
Figure 77 – Ports Settings Window
the SmartRack 116 IP Switching System Locally
Using the OSD
User Guide | 71
Keyboard Language
General settings window
(see
is considered
a
give each Switch’s OSD
store
the OSD
previously
been
so that the red