User guide

Operating
the SmartRack 116 IP Switching Sys
Using the OSD
68 | SmartRack 116 IP
 Ports (see Section 6.2.5)
 Time (see Section 6.2.6)
 Users (see Section 6.2.7
)
 Security (see Section
6.2.8
You can also view the available Help (see Section
To
configure the OSD settings
1. Press F2.
The OSD Settings wi
ndow
Figure
When the OSD is password protected (explained below), only the Administrator
has access to the F2 settings window.
6.2.4
Configuring the General Settings
Fr
om the General Settings screen, you can configure the following general settings:
 Security
 OSD hotkey
 Autoskip
 Keyboard language
 Switch name
From this screen, you can also restore the OSD to its factory default.
To
configure the general settings
1.
In the OSD Settings window
line is on it, and press
Enter
The General Settings wi
ndow
the SmartRack 116 IP Switching Sys
tem Locally
)
)
6.2.8
)
You can also view the available Help (see Section
6.2.9).
configure the OSD settings
:
ndow
appears.
Figure
75 – OSD Settings Window
When the OSD is password protected (explained below), only the Administrator
has access to the F2 settings window.
Configuring the General Settings
om the General Settings screen, you can configure the following general settings:
From this screen, you can also restore the OSD to its factory default.
configure the general settings
:
In the OSD Settings window
(see Figure 75), navigate to GENERAL
so that the red
Enter
.
ndow
appears.
When the OSD is password protected (explained below), only the Administrator
om the General Settings screen, you can configure the following general settings:
so that the red