User guide

Lines with yellow text show active computers. Lines with blue text show inactive
computers. The Type
column indic
is connected to the port.
6.2.1
Navigating the OSD
You can navigate the OSD, as follows:

To move up and down

To jump from one column to the next (when relevant)

To exit the OSD or return to a previous window within the OSD
6.2.2
Selecting a Computer
To select a computer:
1.
Navigate to the desired computer line.
OR
Type the port number of the desired computer.
2. Press Enter.
The selected computer is accessed. A Confirmation label appears showing which
computer is accessed
.
When the OSD is displayed
Select buttons or the
6.2.3 Configuring t
he OSD Settings
You can configure the following OSD settings:
 General (see Section
6.2.4
Operating
the SmartRack 116 IP Switching System Locally
Figure 74 – OSD Main Window
Lines with yellow text show active computers. Lines with blue text show inactive
column indic
ates that a computer “C”
or another switch “S”
is connected to the port.
Navigating the OSD
You can navigate the OSD, as follows:
To move up and down
– Use the Up and Down arrow keys.
To jump from one column to the next (when relevant)
– Use the
Tab
To exit the OSD or return to a previous window within the OSD
– P
ress
Selecting a Computer
Navigate to the desired computer line.
Type the port number of the desired computer.
The selected computer is accessed. A Confirmation label appears showing which
.
When the OSD is displayed
,
you cannot select computers using
Select buttons or the
keyboard hotkeys.
he OSD Settings
You can configure the following OSD settings:
6.2.4
)
the SmartRack 116 IP Switching System Locally
Using the OSD
User Guide | 67
Lines with yellow text show active computers. Lines with blue text show inactive
or another switch “S”
Tab
key.
ress
Esc.
The selected computer is accessed. A Confirmation label appears showing which
you cannot select computers using
the front panel