User guide

Conducting a Remote Session
Adjusting the Video
52 | SmartRack 116 IP
The chosen setting take
s
appears.
4.7
Adjusting the Video
There are three ways to adjust the video

Refreshing the video image

Automatically adjusting the video
 Manually c
hanging advanced
4.7.1
Refreshing the Video Image
The video image may
require refreshing
target server.
Refreshing completely regenerates the video image.
To
refresh the video image
1. On the toolbar, select
The image is refreshed.
4.7.2
Automatically Adjusting the Video
The video view may need to be adjusted for each target server or new screen
resolution. In most cases, adjusting the video view using the default video settings
gives the optimal view.
To a
utomatically adjust the video
1. On the toolbar, select
The
progress of video adjustment is displayed
Figure
The process takes a few
an indication that there
i
verify that no dynamic v
i
s
effect and the screen of the last accessed t
arget
Adjusting the Video
There are three ways to adjust the video
image:
Refreshing the video image
Automatically adjusting the video
image
hanging advanced
video settings
Refreshing the Video Image
require refreshing
when changing the display attrib
u
Refreshing completely regenerates the video image.
refresh the video image
:
> Refresh.
Automatically Adjusting the Video
Image
The video view may need to be adjusted for each target server or new screen
resolution. In most cases, adjusting the video view using the default video settings
utomatically adjust the video
image:
> Video Adjust.
progress of video adjustment is displayed
.
Figure
58 – Video Adjust Progress
seconds. If the process runs more than
a few times
i
s an abnormal noise level. Check the video c
ab
i
deo application is running on the
target server
arget
server
u
tes of a
The video view may need to be adjusted for each target server or new screen
resolution. In most cases, adjusting the video view using the default video settings
a few times
, it is
ab
le and
target server
’s desktop.