User guide

Standard Security Policy
At least six characters
Must not include the user name
To
configure the security settings
1.
From the configuration menu, select
The Security page
appears.
2. In the Account Block
ing
 In Block after, typ
e
username or password
forced time lock.
 In Block account
, select
time, or forever f
or a total block
3. Select the
High security password policy
password policy; clear the checkbox for the standard security policy to apply.
4. In Disconnect after
, select the timeout inactivity period after which the user is
disconnected fro
m the system. Select
3.8
Performing Additional Configuration Operations
You can perform the following additional operations on

Install an SSL certificate
Configuring
Performing
Additional Configuration Operations
High Security Policy
At least eight characters; must include at least
one digit, one
uppercase letter, and one of the following
“special” characters
$, %, ^, *, (), _, -, +, =, [], ’, :, ;, ?, /, or {}
Must not include the user name
configure the security settings
:
From the configuration menu, select
Security.
appears.
Figure 43 – Security Page
ing
section:
e
the number of allowable attempts to log
in with a wrong
username or password
in a time period specified in
attempts within
, select
for period
to block the account for a specified period of
or a total block
.
High security password policy
checkbox to enable the high security
password policy; clear the checkbox for the standard security policy to apply.
, select the timeout inactivity period after which the user is
m the system. Select
No Timeout to disable t
imeout.
Performing Additional Configuration Operations
You can perform the following additional operations on
SmartRack 116 IP
Install an SSL certificate
.
Configuring
the Network
Additional Configuration Operations
User Guide | 39
one digit, one
“special” characters
: !, @, #,
in with a wrong
attempts within
, prior to a
to block the account for a specified period of
checkbox to enable the high security
password policy; clear the checkbox for the standard security policy to apply.
, select the timeout inactivity period after which the user is
imeout.
Performing Additional Configuration Operations
SmartRack 116 IP
: