User guide

Configuring the Network
Configuring User Settings
36 | SmartRack 116 IP
3.5.2 Deleting User(s)
You can delete one or multiple Users at a time from the system.
You cannot delete an Administrator who is logged onto the system.
To delete a User:
1. In the Users page (see
Figure
by selecting the first User in th
selecting the last User.
2. Click the Delete button.
The Delete confirmation page appears.
Figure
3. Click Yes.
The User(s) are
deleted from the system.
3.5.3 Blocking a User
An alternative to deleting a
U
and password is stored, but the
To block a User:
1. In the Add User page
(see
checkbox.
3.5.4 Editing User
Information
You can change any
of the following User
Password.
To edit User information:
1. In the Users page (see
Figure
The Edit User page appears, with the User’s information in the parameters.
You can delete one or multiple Users at a time from the system.
You cannot delete an Administrator who is logged onto the system.
Figure
38), select User(s) to delete. Select a
group
by selecting the first User in th
e group, pressing the Shift
button, and then
The Delete confirmation page appears.
Figure
40 – Delete User Confirmation
deleted from the system.
U
ser is blocking a User. This means that the
U
and password is stored, but the
User is unable to access the system.
(see
Figure 39), in the Access parameter,
select
Information
of the following User
parameters: Permission,
Access
Figure
38), select a User and click the Edit
button
The Edit User page appears, with the User’s information in the parameters.
You cannot delete an Administrator who is logged onto the system.
group
of Users
button, and then
U
ser’s name
select
the Block
Access
, and
button
.
The Edit User page appears, with the User’s information in the parameters.