User guide

Configuring the Network
Configuring Network SNMP Settings
34 | SmartRack 116 IP
In Manager IP Address
, type the static IP address of the Centralized Management
Manager.
Although not required, it is
if the
SmartRack 116 IP
Centralized Management Manager
3.4
Configuring Network SNMP Settings
You can activate SNMP logging
the SmartRack 116 IP
to send monitoring events (such as log entries) to the SNMP
server. See Chapter 9
for a list of all recorded SNMP events.
To enable and configure
SNMP
1.
From the configuration men
The SNMP page opens.
2. Select the Enable Traps
checkbox t
and operation.
3. In Community, type the
name of the
4. In SNMP Manager IP,
type the SNMP Server IP address.
3.5
Configuring User Settings
An Administrator can
add, edit, remove
There are two levels of user access:
 Administrator –
has unrestricted access to all windows and settings, and can
change the name and password of all users
 User – can access and
control
settings and power cycle
; cannot access the
3.5.1 Adding a User
To add a User:
1.
From the configuration menu, select
, type the static IP address of the Centralized Management
Although not required, it is
recommended to type the
Manager IP Address
SmartRack 116 IP
resides on the same network segment
as the
Centralized Management Manager
.
Configuring Network SNMP Settings
You can activate SNMP logging
to provide support network monitoring. This will cause
to send monitoring events (such as log entries) to the SNMP
for a list of all recorded SNMP events.
SNMP
logging:
From the configuration men
u, select SNMP.
Figure 37 – SNMP Settings
checkbox t
o enable SNMP traps of
SmartRack 116 IP
name of the
SNMP community.
type the SNMP Server IP address.
Configuring User Settings
add, edit, remove
, and block Users.
There are two levels of user access:
has unrestricted access to all windows and settings, and can
change the name and password of all users
control
target s
ervers, but cannot use advanced mouse
; cannot access the
Web configuration interface
From the configuration menu, select
Users.
, type the static IP address of the Centralized Management
Manager IP Address
even
as the
to provide support network monitoring. This will cause
to send monitoring events (such as log entries) to the SNMP
SmartRack 116 IP
events
has unrestricted access to all windows and settings, and can
ervers, but cannot use advanced mouse
Web configuration interface