User guide

To configure Device ID
1. In Device Name,
type a name for
2. In TCP Port,
type the number of the port (from 800 to 65535)
3.3.2 Configuring
the
When a DHCP server is active on the same network to which
connected, the DHCP
can provide
recommend using MAC address reservations in the DHCP server to ensure that the IP
address of the
SmartRack 116 IP
Consult
your Network Administrator regarding the use of the DHCP
If
you have access to the server
device name will appear on the DHCP server’s interface, making it easy to
locate.
To configure
the device IP address
 Select automatic IP
address
enable a DHCP server that is active on the same network to which
IP
is connected, to provide automatic IP assignment

Select manual IP address assignment
the DHCP, and then
type the
LAN 1
, provided by your Network Administrator
3.3.3
Configuring Centralized Management Settings
Minicom’s Centralized Management IP
servers and network devices,
environment. The Centralized Management systems combine
access with modern IT standards and requirements. They are the most
comprehe
nsive remote server maintenance solutions available in the market today.
To configure
Centralized Management settings
1. Select the
Enable Centralized Management
be remotely managed by a Centralized Management system
When managed by Centralized Management, only Network Configuration is
available from the
SmartRack 116 IP
as Device Upgrade, Factory Restore, and SSL C
managed from Centralized Management.
2. Select the
Manager Auto Discovery
system to
automatically detect
network segment.
OR
Configuring
Configuring
settings:
type a name for
SmartRack 116 IP.
type the number of the port (from 800 to 65535)
.
the
Device IP Address
When a DHCP server is active on the same network to which
SmartRack 116 IP
can provide
automatic IP assignment.
However, best practices
recommend using MAC address reservations in the DHCP server to ensure that the IP
SmartRack 116 IP
will not be changed.
your Network Administrator regarding the use of the DHCP
.
you have access to the server
, your configured (or default)
SmartRack 116 IP
device name will appear on the DHCP server’s interface, making it easy to
the device IP address
, do one of the following:
address
assignment – Select the Enable DHCP
checkbox to
enable a DHCP server that is active on the same network to which
SmartRack 116
is connected, to provide automatic IP assignment
.
Select manual IP address assignment
– Clear the Enable DHCP
checkbox to disa
type the
IP Address, Subnet Mask, and
Default Gateway
, provided by your Network Administrator
.
Configuring Centralized Management Settings
Minicom’s Centralized Management IP
-based systems ensure
secure control of
servers and network devices,
and
power and user administration in the data center
environment. The Centralized Management systems combine
out-of-
band
access with modern IT standards and requirements. They are the most
nsive remote server maintenance solutions available in the market today.
Centralized Management settings
:
Enable Centralized Management
checkbox to enable
SmartRack 116 IP
be remotely managed by a Centralized Management system
.
When managed by Centralized Management, only Network Configuration is
SmartRack 116 IP
configuration page. All other settings, such
as Device Upgrade, Factory Restore, and SSL C
ertificate are disabled and are
managed from Centralized Management.
Manager Auto Discovery
checkbox to cause
the Centralized Management
automatically detect
SmartRack 116 IP, if
they both resid
Configuring
the Network
the Network Settings
User Guide | 33
SmartRack 116 IP
is
However, best practices
recommend using MAC address reservations in the DHCP server to ensure that the IP
SmartRack 116 IP
device name will appear on the DHCP server’s interface, making it easy to
checkbox to
SmartRack 116
checkbox to disa
ble
Default Gateway
for
secure control of
power and user administration in the data center
band
KVM via IP
access with modern IT standards and requirements. They are the most
nsive remote server maintenance solutions available in the market today.
SmartRack 116 IP
to
When managed by Centralized Management, only Network Configuration is
configuration page. All other settings, such
ertificate are disabled and are
the Centralized Management
they both resid
e on the same