User guide

You
can connect the RICC/ROC PS/2 to a powered on computer
steps of the following procedure in order
To connect the
RICC/ROC PS/2
1.
Connect the Mouse connector to the compu
2.
Connect the Keyboard connector to the computer’s Keyboard port.
3.
Connect the Screen connector to the computer’s Video
Failure to connect in the
the mouse malfunctioning until the server is rebooted.
2.6.2
Connecting a RICC
The
RICC/ROC USB supports Windows 98 SE and later, MAC, SUN
modern Linux distributions. The connections
as for the ROC USB.
The following figure illustrates the
Connecting
Figure 30 – ROC PS/2 Connections
can connect the RICC/ROC PS/2 to a powered on computer
, by performing the
steps of the following procedure in order
.
RICC/ROC PS/2
to a powered on computer:
Connect the Mouse connector to the compu
ter’s Mouse port.
Connect the Keyboard connector to the computer’s Keyboard port.
Connect the Screen connector to the computer’s Video
card.
Failure to connect in the
above order while the server is running may lead to
the mouse malfunctioning until the server is rebooted.
Connecting a RICC
/ROC USB
RICC/ROC USB supports Windows 98 SE and later, MAC, SUN
,
and SGI, and all
modern Linux distributions. The connections
for the RICC USB
are exactly the same
The following figure illustrates the
ROC USB and its connections.
Installation
Connecting
to the Servers
User Guide | 25
, by performing the
above order while the server is running may lead to
and SGI, and all
are exactly the same