User guide

Installation
Rack Mounting SmartRack 116 IP
22 | SmartRack 116 IP
9.
Connect three flat screws to the rear of the console on both sides.
Figure 22 –
Connecting Three Flat Screws to the Rear of the Console
The
console now sits snugly in the rack.
Figure
2.4.4
Connecting the KVM Switch 116 IP
To connect the KVM Switch:
1. Connect B
racket A to the sides of the Switch using the t
Figure 24 –
Connecting
2.
Slide Switch 116 IP into the rail and into the back of the SmartRack console until
you hear a click.
Figure 21 – Rail-lock Switch
Connect three flat screws to the rear of the console on both sides.
Connecting Three Flat Screws to the Rear of the Console
console now sits snugly in the rack.
Figure
23 – Console in the Rack
Connecting the KVM Switch 116 IP
To connect the KVM Switch:
racket A to the sides of the Switch using the t
wo 6
mm screws provided.
Connecting
Bracket A to the Sides of the Switch
Slide Switch 116 IP into the rail and into the back of the SmartRack console until
Connecting Three Flat Screws to the Rear of the Console
mm screws provided.
Slide Switch 116 IP into the rail and into the back of the SmartRack console until