User guide

Installation
Rack Mounting SmartRack 116 IP
20 | SmartRack 116 IP
Figure 14 –
Inserting and
5.
Repeat steps 1 to 4 for the other side.
2.4.3 Connecting
SmartRack 116 IP
You can connect the
SmartRack 116 IP
kit.
To connect to a rack:
1.
Move the rail until two screws appear.
Figure
2.
Loosen slightly the seven
Figure
3.
Adjust the rear bracket to fit your cabinet.
Figure
4.
Install the front and rear bracket onto the cabinet.
Inserting and
Tightening the Long Bracket
Repeat steps 1 to 4 for the other side.
SmartRack 116 IP
to a Rack
SmartRack 116 IP
Switch to a rack, using the supp
lied
Move the rail until two screws appear.
Figure
15 – Exposing Two Screw
Loosen slightly the seven
screws.
Figure
16 – Loosening the Screws
Adjust the rear bracket to fit your cabinet.
Figure
17 – Adjusting the Rear Bracket
Install the front and rear bracket onto the cabinet.
lied
hardware