User guide

Installation
System Components
User Guide | 17
Figure 7 – Bracket A
 Screws x 4
Figure 8 – Screw
 Keys x 2
Figure 9 – Keys
2.2.2 The SmartRack 116 IP Unit
The SmartRack 116 IP Switch is illustrated in Figure 10.
Figure 10 – SmartRack 116 IP Switch Ports
The following table describes the functionality of the ports of the SmartRack 116 IP
Switch.
Port Functionality
Serial
Not in use
Flash
For updating firmware of the analogue part of the SmartRack 116 IP Switch system - OSD,
Switch, RICCs, and ROCs.
LAN
For connecting to the 10/100 Mbit Ethernet. The LED illuminates green when the unit is
connected to a 100 Mbit/sec network; it illuminates yellow when the unit is connected to a
10 Mbit/sec network.
Server ports For connecting to the servers via the RICC/ROCs.