Installation guide

I
INSTALLATION GUIDE
12.
13.
Connecting the power supply
Connect the Smart 16 IP to the power supply using the Power cable provided.
Rack mounting the Smart 16 IP
Use the plate and screws provided to mount the Smart 16 IP on a server rack as
illustrated below.
Insert screws to
connect to Switch
side panel
Insert screws to
connect to rack
www.minicom.com
SWITCH IP
MINICOM
CAT5
SMART
Activity
System OK
14. Rack mounting the RICCs
You can attach the RICCs to a server rack or computer using the Velcro strips
provided. Or connect it using the bracket provided.
The figure below illustrates the bracket.
Insert screws through
bracket and into the
back of the RICC
Insert screws through
bracket and into the
back of the RICC
Insert screws through
bracket and into the
rack
Insert screw through
bracket and into the
back of a computer
10.