User guide

Selecting a computer
To select a computer:
1. Press the Up or Down arrow keys.
2. Press Enter. The OSD window disappears, and the
appears on the screen showing which computer is
accessed. When the selected computer is switched off,
the screen appears dark.
selected computer’s screen appears. An OSD tag
(i). When Autoskip is On, all the active computers appear
in yellow letters. The arrow keys access only the active
computers.
(ii). When Autoskip is Off, The arrow keys access both
active and inactive computers.
(iii).Autoskip On is the default.
19. Scanning computers
After configuring the Scan Setup window, as explained
above, you can scan the computers.
To activate scanning:
• Press Shift twice. The OSD appears.
• Press F4. Your screen displays each active computer
sequentially, with the Scan label appearing in the top
left corner.
To deactivate scanning:
18