User guide

(iii).Erase a line of existing characters by navigating with

the cursor to the beginning of that line and pressing

Space. Keep Space depressed until the line is erased.

12. Configuring the Scan Setup window

Configure the scan function in the Scan Setup window as

follows:

1. Press F3. The Scan Setup window appears.

See Figure 9.

Figure 9 The Scan Setup window

Change the scanning period in the SCAN / SEC column.

Change the display period of a computer’s screen with the

OSD summary in the DISP/SEC column.

To set the above periods:

1. Place the cursor over one of the 3 digits and type a new

number.