Installation guide

SMART CAT5 SWITCH 16 IP.
94. Write Configuration
With the Control software you can make changes to all OSD settings. You can
then save these configurations in a file to use in the future by selecting Save or
Save As from the File menu.
Note! Save or Save As will have no affect on the OSD.
To change the OSD settings you must press or choose Write
Configuration from the File menu after making changes. The changes will then be
sent to the Smart system Manager, and the OSD will reflect these changes.
95. Renaming a computer
To rename a computer:
1. Type the new name in the box below the computer icon.
2. Click
to send the new name to the system.
Or click Save or Save
96.
97.
As from the File menu to save the change in a file and not
alter the OSD names.
The Edit menu
You can edit all OSD fields. Edit the following from the Edit menu.
• Logo
• Passwords
• Settings
Logo and Passwords
You can edit the logo that appears at the top of the OSD window. You can also
edit the names and passwords for the Administrator, Supervisor and 6 Users.
1. Edit the Logo and Passwords by choosing them from the Edit menu. See
figures below.
67.