Installation guide

OPERATING GUIDE.
Appendix C: Operating the Smart 16 IP
system locally
Switch between the connected computers by either:
• Keyboard hotkeys
• The OSD (On Screen Display)
• Control software
The OSD / Control software is also the place to adjust various settings as
explained below.
68. The keyboard hotkeys
To switch to the next computer forwards press Shift then, +. Release Shift, before
pressing +.
To switch to the next computer backwards press Shift then, -. Release Shift,
before pressing -.
Note! With a US English keyboard you can use the + key of the alphanumeric
section or of the numeric keypad. With a Non-US English keyboard only use the
+ key of the numeric keypad.
69. The OSD
To display the OSD:
Press Shift twice. The OSD Main window appears. See Figure 32. Lines with
blue text show active computers. Lines with grey text show inactive computers.
The Type column indicates whether a computer “C” or another switch “S” is
connected to the port.
P
ort num
b
er
appears here
Ins tr uc tion
keys
C
=computer
S=sw itch
Figure 32 The OSD Main window
54.